The DHT22 Digital Temperature & Humidity Sensor Module with Cable ASAIR is a brand new component for IoT builds, monitoring systems, and electronics projects that need dependable environmental readings. Designed for straightforward integration, this sensor combines temperature and humidity measurement in one compact module and connects through a digital interface that suits many popular controller boards. It is commonly used with Arduino, Raspberry Pi, ESP32, and similar compatible hardware for weather stations, automation setups, HVAC monitoring, and custom prototypes. The included cable adds convenience for installation and testing, while the compact design makes it easy to fit into a wide range of projects. Find this brand new ASAIR sensor at GAMERIFT for your next build.

XHM401 DCDC Step Down Buck Converter Power Supply Module XL4016E1 for IoT is a brand new adjustable DC step-down module for electronics projects that need dependable voltage regulation. Built around the XL4016E1 chip, it accepts a 5V to 40V DC input and provides an adjustable 1.2V to 36V output, with output capability up to 8A. A built-in heat sink helps with thermal control during operation, while the precision potentiometer allows accurate voltage adjustment for different setups. High-frequency switching supports efficient conversion, and over-temperature plus short-circuit protection add useful safeguards. Suitable for battery charging applications, LED drivers, and DIY electronics work, this module is available from GAMERIFT.

The 0.96 Inch I2C IIC Blue OLED LCD Module 4pin with VCC GND and SSD1306 chip is a compact display option for IoT builds, electronics projects, and microcontroller setups. This brand new module features a clear blue 0.96 inch OLED screen with 128×64 resolution and a simple 4-pin I2C connection for VCC, GND, SCL, and SDA. Designed for low power use, the OLED panel does not require a backlight, helping keep power draw down in portable or always-on applications. Suitable for use with boards such as Arduino, Raspberry Pi, and ESP32, this module is an easy fit for sensor readouts, status displays, and custom GAMERIFT project builds.

DS18B20 IP67 Waterproof Digital Thermal Probe 1m with Original Chip (26AWG) is a brand new temperature sensor for IoT projects that need dependable digital readings in wet or demanding environments. Built with a stainless steel probe housing, it is designed to be waterproof, moisture resistant, and rust resistant for practical use in monitoring setups, home automation, and DIY electronics. The DS18B20 sensor supports a 1-Wire digital interface for simple connection, offers selectable 9 to 12 bit resolution, and provides ±0.5°C accuracy. A 1 metre cable gives flexible placement, while the original chip design and unique 64 bit ID make it suitable for multi-sensor applications. Available from GAMERIFT.

The MQ2 Smoke Gas LPG Butane hydrogen Sensor Module for IoT is a brand new sensor module suited to gas and smoke detection in electronics, automation, and monitoring projects. It is designed to detect LPG, butane, methane, hydrogen, alcohol, and smoke, making it a practical choice for leak alerts, air monitoring, and safety-focused builds. With analog and digital outputs, it works well in setups using Arduino, Raspberry Pi, ESP32, and similar development boards. A built-in potentiometer allows sensitivity adjustment to better match your project needs, while 5V operation helps keep integration simple. Available from GAMERIFT, this module is a useful option for prototyping, testing, and general IoT development work.

The 830 Points Solderless Breadboard for IoT projects is a brand new prototyping board made from durable PP materiel. With 830 tie points, it gives you plenty of room to build, test, and refine circuits without soldering. The layout supports standard electronic components such as resistors, capacitors, diodes, and integrated circuits, while dual power rails help keep power distribution neat and practical. Its solderless design makes changes quick during development, whether you are working on learning projects, repairs, or custom builds. Adhesive backing adds convenient mounting options, making this breadboard a useful choice for electronics work from GAMERIFT.

HC-SR501 PIR Motion Sensor Module Green for IoT is a brand new motion detection component designed for projects that need dependable passive infrared sensing. Operating on 4.5V to 20V, this compact module provides a digital output when motion is detected and includes adjustable sensitivity and delay time through onboard potentiometers. Its low power design makes it a practical choice for automation, security, lighting control, and smart device builds. Commonly used with microcontrollers such as Arduino and Raspberry Pi, the HC-SR501 is well suited to hobby, education, and prototyping use. Shop with GAMERIFT for clear product identification and straightforward pre-owned and new item listings.